Removing The Center Control Cover - Dell Studio 1745 Service Manual

Back to Contents Page
Center Control Cover
Dell Studio™ 1745/1747 Service Manual
Removing the Center Control Cover
Replacing the Center Control Cover
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Center Control Cover
1. Follow the procedures in
2. Remove the battery (see
3. Remove the screw that secures the center control cover to the computer base.
4. Turn the computer over and open the display as far as it will open.
5. Pry out the center control cover with a plastic scribe starting from the back of the computer.
6. Ease the center control cover up.
1 center control cover
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
2 plastic scribe
UserManuals.info
Removing the Battery) before working inside the