Dell Studio 1745 Service Manual page 58

Back to Contents Page
TV Antenna Cable Assembly
Dell Studio™ 1745/1747 Service Manual
Removing the TV Antenna Cable Assembly
Replacing the TV Antenna Cable Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the TV Antenna Cable Assembly
1. Follow the procedures in
2. Remove the battery (see
3. Follow the instructions from
4. Remove the two screws that secure the TV antenna cable assembly to the computer base.
5. Release the TV antenna cable assembly from the routing guides on the computer base.
6. Lift the TV antenna cable assembly off the computer base.
1 screws (2)
3 routing guides
Replacing the TV Antenna Cable Assembly
1. Follow the procedures in
2. Route the TV antenna cable assembly through the routing guides on the computer base.
3. Replace the two screws that secure the TV antenna cable assembly to the computer base.
4. Follow the instructions from
5. Replace the battery (see
Back to Contents Page
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
step 2 to step 19 in Removing the System
2 TV antenna cable assembly
Before You Begin.
step 6 to step 21 in Replacing the System
Replacing the Battery).
UserManuals.info
Removing the Battery) before working inside the
Board.
Board.