Back to Contents Page
Subwoofer Assembly
Dell Studio™ 1745/1747 Service Manual
Removing the Subwoofer Assembly
Replacing the Subwoofer Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Subwoofer Assembly
1. Follow the procedures in
2. Remove the battery (see
3. Follow the instructions from
4. Loosen the three captive screws that secure the subwoofer assembly to the computer base.
5. Lift the subwoofer assembly out of the computer base.
1
captive screws (3)
Replacing the Subwoofer Assembly
1. Follow the procedures in
2. Place the subwoofer assembly on the computer base.
3. Tighten the three captive screws that secure the subwoofer assembly to the computer base.
4. Follow the instructions from
5. Replace the battery (see
Back to Contents Page
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You
Begin.
Removing the
Battery).
step 2
to
step 19
in
Removing the System
2
subwoofer assembly
Before You
Begin.
step 6
to
step 21
in
Replacing the System
Replacing the
Battery).
UserManuals.info
Removing the
Battery) before working inside the
Board.
Board.