Dell Studio 1745 Service Manual page 26

Hide thumbs Also See for Studio 1745:
Table of Contents

Advertisement

 Display Panel
 
Removing the Display Panel
 
1. Follow the procedures in
 
2. Remove the display assembly (see
 
3. Remove the display bezel (see
 
4. Remove the eight screws that secure the display panel to the display cover.
1
screws (8)
3
display cover
 
5. Remove the antenna cables, power button cable, and display cable from the hinge latches.
 
6. Disconnect the camera cable from the connector on the camera board (see
 
7. Lift the display panel off the display cover.
 
8. Remove the eight screws (four on each side) that secure the display panel brackets to the display panel.
1
display panel brackets (2)
 
Replacing the Display Panel
 
1. Follow the procedures in
 
2. Replace the eight screws (four on each side) that secure the display panel brackets to the display panel.
 
3. Connect the camera cable to the connector on the camera board (see
Great user manuals database on
Before You
Begin.
Removing the Display
Assembly).
Removing the Display
Bezel).
2
display panel
 
 
2
screws (8)
Before You
Begin.
UserManuals.info
Removing the
Camera).
Replacing the
Camera).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio 1747

Table of Contents