Dell Studio 1745 Service Manual page 38

2. Align the notch in the memory module with the tab in the memory module connector.
3. Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the
click, remove the memory module and reinstall it.
NOTE: If the memory module is not installed properly, the computer may not boot.
1 tab
4. Replace the base cover (see
5. Replace the battery (see
6. Turn on the computer.
As the computer boots, it detects the memory module(s) and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start
Back to Contents Page
Great user manuals database on
2 notch
Replacing the Base Cover).
Replacing the Battery), or connect the AC adapter to your computer and an electrical outlet.
UserManuals.info
® Help and Support® Dell System Information.