Removing The Thermal Fan; Replacing The Thermal Fan - Dell Studio 1745 Service Manual

Back to Contents Page
Thermal Fan
Dell Studio™ 1745/1747 Service Manual
Removing the Thermal Fan
Replacing the Thermal Fan
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Thermal Fan
1. Follow the procedures in
2. Remove the battery (see
3. Remove the center control cover (see
4. Remove the keyboard (see
5. Remove the media controls board (see
6. Remove the palm rest (see
7. Disconnect the thermal fan cable from the thermal fan cable connector on the system board.
8. Remove the two screws that secure the thermal fan to the computer base.
9. Lift the thermal fan along with the cable, off the computer base.
1 thermal fan cable connector
3 screws (2)
Replacing the Thermal Fan
1. Follow the procedures in
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Center Control
Removing the Keyboard).
Removing the Media Controls
Removing the Palm Rest).
2
Before You Begin.
UserManuals.info
Removing the
Cover).
Board).
thermal fan
Battery) before working inside the