Dell Studio 1745 Service Manual page 22

4. Follow the instructions from
5. Replace the battery (see
Graphic Processor Heat Sink
Removing the Graphic Processor Heat Sink
1. Follow the instructions in
2. Remove the battery (see
3. Follow the instructions from
4. In sequential order (indicated on the processor heat sink), loosen the four captive screws that secure the processor heat sink to the system board.
5. Lift the graphic processor heat sink off the system board.
1 screws (4)
Replacing the Graphic Processor Heat Sink
NOTE: This procedure assumes that you have already removed the graphic processor heat sink and are ready to replace it.
1. Follow the procedures in
2. Place the graphic processor heat sink on the system board.
3. Align the four captive screws on the graphic processor heat sink with the screw holes on the system board and tighten the screws in sequential order
(indicated on the processor heat sink).
4. Follow the instructions from
5. Replace the battery (see
Back to Contents Page
Great user manuals database on
step 5 to step 21 in Replacing the System
Replacing the Battery).
Before You Begin.
Removing the Battery).
step 2 to step 20 in Removing the System
2 graphic processor heat sink
Before You Begin.
step 5 to step 21 in Replacing the System
Replacing the Battery).
UserManuals.info
Board.
Board.
Board.