Resetting All Setting Values To The Factory Default Values - Sharp AJ-6110 Setup And Operation Manual

RESETTING ALL SETTING VALUES TO THE
FACTORY DEFAULT VALUES
This function will return all current settings and the user defaults to the factory default
settings. Follow the steps shown below to return all changed settings to the factory default
settings.
Press the "MENU" button, and repeatedly press the
1
"ARROW" buttons until "Reset Factory" is shown on the first
line of the display panel.
Press the "ENTER" button.
2
Repeatedly press the
3
"2. Yes" or "1. No" on the second line of the display panel.
Press the "ENTER" button.
4
When selecting "2. Yes", the following message will appear on the display panel to
inform you that all the setting values will return to their factory defaults. The unit
will automatically return to the ready state.
If "1. No" was selected in step 3 the display will immediately return to the ready
message.
Downloaded from: http://www.usersmanualguide.com/
10.Reset Factory
or "ARROW" buttons to display
Resetting Factory
Defaults...
or
59