Changing The Language Setting - Sharp AJ-6110 Setup And Operation Manual

CHANGING THE LANGUAGE SETTING

Use this function to change the language shown in the display panel. Follow the steps
shown below to change the language setting.
Press the "MENU" button, and repeatedly press the
1
"ARROW" buttons until "Language" is shown on the first line of
the display panel.
Repeatedly press the
2
the desired language setting on the second line of the display
panel.
Select from "1. American English", "2. English" (Default setting),
"3. Français", "4. Español", "5. Italiano", "6. Deutsch", "7. Nederlands", and
"8. Svenska".
Press the "ENTER" button.
3
Repeatedly press the
4
"2. Yes" or "1. No" on the second line of the display panel.
Press the "ENTER" button.
5
When you select "2. Yes", the following message will appear on the display panel
to inform you that the unit is updating the display language. The unit will
automatically return to the ready state.
If "1. No" was selected in step 4 the display will immediately return to the ready
message.
58
Downloaded from: http://www.usersmanualguide.com/
11.Language
2.English
or "ARROW" buttons until it shows
or "ARROW" buttons to display
Updating display
language...
or