Basic Functions And Display Panel - Sharp AJ-6110 Setup And Operation Manual

BASIC FUNCTIONS AND DISPLAY PANEL

This unit can be used as a copier, a scanner, and a printer. The display panel shows
currently selected function. All the three functions are available when the display panel
shows the ready message.
Ready
Copy
Printer
Scanner
Downloaded from: http://www.usersmanualguide.com/
Ready to Copy
100% A4
Ready to Copy
100% A4
Copying...
100% A4
Ready to Copy
100% A4
Printing...
Ready to program
Ready to Copy
100% A4
Scanning...
Ready to Copy
100% A4
Scan using:
1.ScanMenu 1
Scanning...
ScanMenu 1
While the unit is printing, either a copying or scanning job can be sent to the unit.
In this case the unit will perform the copying or "SCAN" button job after the
printing job has been completed. (See page 63)
When the unit is connected to a power outlet, printing or scanning jobs from your
computer can be sent to the unit at any time, even if the power switch is off.
Neither a printing nor a scanning job can be sent to the unit from your computer
during the specified period of program timeout after copying. (See page 55)
The ready message is displayed when
the unit is ready for use as a copier,
0
printer or scanner.
The unit will start copying when the
START button (
0
While the unit is copying, the unit cannot
be used as a printer or a scanner.
The unit will return to the ready state
0
after copying is complete.
When the unit receives a print job from
your computer it will start to print.
0
While the unit is printing, the unit cannot
be used as a copier or a scanner.
The unit will return to the ready state
after the print job is complete.
0
When the unit receives a scanning job
from your computer it will start to scan.
By pressing the SCAN button on the
unit, the display will change.
By pressing the START button (
the unit, scanning starts.
0
While scanning, the unit cannot be used
as a copier or a printer.
The unit will return to the ready state
after the scan job is complete.
) is pressed.
) on
41