Lower the print head latch.
9
Lower the latch until it clicks into the latched position.
Make sure that the print head is fixed securely. Failing to do so may generate
noise or cause errors.
Inserting the ink tanks
Unpack the ink tanks from their protective wrapping and slowly
10
remove the tape.
Turn the ink tanks upside down.
11
Downloaded from:
http://www.usersmanualguide.com/
Hold the ink tank upright when removing the tape. Do not touch the uncovered
opening on the ink tank, as ink will get on your hands.
Ensure that there are no pieces of tape remaining on the ink tank.
INSTALLING THE PRINT HEADS AND THE INK TANKS
Do not touch the area.
The unit may not copy if it is dirty.
17