Connecting The Interface Cable - Sharp AJ-6110 Setup And Operation Manual

CONNECTING THE INTERFACE CABLE

This unit includes both USB and parallel interface connectors.
Interface cables for connecting the unit to your computer are not included with this unit.
Please purchase the appropriate cable for your computer.
Connecting the USB interface cable
USB is available with a PC/AT compatible computer that was originally equipped
with USB and had Windows 98, Windows Me, Windows 2000 Professional,
Windows XP Professional or Windows XP Home Edition preinstalled.
Obtain a shielded USB interface cable.
1
Insert the cable into the USB interface connector located on the
2
rear of the unit.
Insert the other end of the cable into the interface connector of
3
your computer, or the USB hub connected to your computer.
Connecting the parallel interface cable
Obtain an IEEE1284 shielded parallel interface cable.
1
Ensure that your computer and unit are turned off.
2
Insert the cable into the parallel interface connector located on
3
the rear of the unit, and fasten with clasps.
Insert the other end of the cable into the interface connector of
4
your computer.
12
Downloaded from: http://www.usersmanualguide.com/
This unit is equipped with two types of interface connectors, which enables you
to connect two computers at a time.
With the automatic interface switching function, you can print a document by
simply sending a printing job from each computer.