LOADING PAPER INTO THE PAPER TRAY
(For printing only)
When loading index cards, postcards or birthday cards
1 Set the paper knob to the "Thick Paper (
2 Set guide
Close the front lid of the paper tray by firmly pushing its right
5
edge.
If the length of the paper is longer than the tray, keep the front lid of the tray open
while printing.
Attach the output tray.
6
26
Downloaded from:
http://www.usersmanualguide.com/
print side down.
up, and then fit guide
Most paper and envelopes will be fed correctly from the paper tray. However, if
paper or envelopes are particularly stiff or heavy they should be fed one at a time
through the bypass tray. This will avoid wrinkling or misfeeding.
It is recommended that you perform test printing on normal paper before printing
on the card.
)" setting, and then load the card
and
against the loaded cards.
Place this projection
toward the unit.
Be sure to load in
portrait direction.