Aligning The Print Heads - Sharp AJ-6110 Setup And Operation Manual

ALIGNING THE PRINT HEADS

The print heads must be aligned after being installed into the unit, or if lines are printed
unevenly (See the illustration on page 22). Follow the steps listed below to align the print
heads.
Set A4 sized paper in the tray.
1
Refer to "LOADING PAPER" for more information (See page 24).
Press the "MENU" button and then repeatedly press the
2
"ARROW" buttons until "Maintenance" is displayed on the first
line of the display panel.
Repeatedly press the
3
Print Head" appears on the second line of the display panel.
Press the "ENTER" button.
4
The message shown below will appear on the display panel and alignment patterns will
be automatically printed.
20
Downloaded from: http://www.usersmanualguide.com/
3.Maintenance
1.Clean PrintHead1
or "ARROW" buttons until "Align
3.Maintenance
6.Align Print Head
Printing...
Alignment Patterns
or