BMW 2 COUPE 2023 Series Owner's Manual page 96

CONTROLS
Manual longitudinal setting
Fold the seat backrest forward
1. Pull lever up to the stop.
2. Fold the seat backrest forward.
3. Push the seat forward.
Push the seat backrest rearward
1. Push the seat back into the initial position.
2. Fold back the backrest to lock the seat.
Electric longitudinal setting
Fold the seat backrest forward
1. Pull lever up to the stop.
2. Fold the seat backrest forward.
To make the entry to the rear easier, the seat
will automatically move to the most forward
position.
The process will be terminated when the
switch for the forward/back direction adjust-
ment is pressed or the backrest is reclined.
96
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A5E788 - VI/22
Push the seat backrest rearward
Push the seat backrest rearward and lock it.
The seat moves automatically to the last seat
position that was stored.
Calibrating the front seats
General information
As soon as the electric seat setting no longer
functions precisely, a Check Control message
is displayed on the control display.
To restore the accuracy of the electric seat set-
ting, the front seats must be calibrated.
Safety information
Warning
There is a danger of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
travel path of the seat is clear prior to any
adjustment.
Calibrating the front seat
1. Press the longitudinal direction switch for-
ward until the seat stops.
2. Press the switch forward again until the
seat stops.
3. Readjust the seat to the desired position.
As soon as the message on the control dis-
play disappears, the calibration is complete.
If the message remains active, repeat the cali-
bration.
If the message is still shown after repeated
calibration, have the system checked by a
qualified authorized service center or another
qualified service center or repair shop.