BMW 2 COUPE 2023 Series Owner's Manual page 80

CONTROLS
Deleting digital keys
General information
Deleted digital keys will be removed from the
list of enabled digital keys.
Deleted digital keys cannot be restored.
Deleting the digital master key
The digital master key can be deleted from the
smartphone or via iDrive.
The deletion of the digital master key is com-
pleted immediately.
Deleting a shared key
Shared keys can be deleted via the smart-
phone with the digital remote control key, via
the smartphone with a shared key or via iDrive.
The deletion via the smartphone using the dig-
ital remote control will not be performed until
the vehicle is used with a key other than the
key to be deleted.
The deletion via the smartphone with a shared
key or via iDrive is executed immediately.
Deletion via iDrive
To be able to delete a digital key via iDrive,
an authorized vehicle key must be located in
the vehicle or the remote control key must be
located in the smartphone tray.
1. "MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Digital Key"
5. If necessary, select the digital key.
6. Delete the Digital Key.
Resetting the function
To reset the BMW Digital Key function, an au-
thorized vehicle key must be located in the ve-
hicle.
80
Opening and closing
Online Edition for Part no. 01405A5E788 - VI/22
When resetting the BMW Digital Key function,
all digital keys including the digital main key
will be deleted. The Key Card digital key is not
deleted.
After the reset, the vehicle can no longer be
unlocked, locked or started with a digital key.
The digital remote control key must be enabled
again to be able to use BMW Digital Key again.
1. "MENU"
2. "Vehicle apps"
3. "Doors and windows"
4. "Digital Key"
5. "Reset function"
Unlocking and locking the vehicle
The vehicle can be unlocked and locked using
the external door handle.
Additional information:
Access to the vehicle interior, refer to page 72.
Turning on the drive-ready state
Using the smartphone tray
1. Open the cover of the smartphone tray.
2. Place smartphone in the center of the
smartphone tray.
Ensure that the display is facing up.
3. Close the cover of the smartphone tray.
4. Press the Start/Stop button to turn on the
drive-ready state.