BMW 2 COUPE 2023 Series Owner's Manual page 207

Turning Park Distance Control
on/off
Turning on the system automatically
The system switches on automatically in the
following situations:
▷ When drive readiness is turned on when
engaging selector lever position R.
▷ While approaching detected obstacles
if the speed is lower than approx.
2.5 mph/4 km/h. The activation distance
depends on the situation in question.
You may switch automatic activation when ob-
stacles are detected on and off.
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Parking and maneuvering"
6. "Automatic PDC activation"
Turning off the system automatically
When driving forward, the system turns off au-
tomatically as needed when a certain distance
or speed is exceeded.
Turning the system on/off manually
Press the button.
▷ On: the LED lights up.
▷ Off: the LED goes out.
If the system is manually switched on when
the reverse gear is engaged, the rearview
camera image is displayed.
Depending on the national-market version, the
system cannot be turned off manually when
the reverse gear is engaged.
Online Edition for Part no. 01405A5E788 - VI/22
Parking
Acoustic warning
General information
An intermittent tone indicates when the vehicle
is approaching an object. E.g., when an object
is detected at the rear left of the vehicle, a
sound is heard from the rear left speaker.
The shorter the distance to the object, the
shorter the intervals of the intermittent tones.
When the distance to a detected object is less
than approx. 8 in/20 cm, a continuous tone is
sounded.
When there are objects in front of and behind
the vehicle at the same time, at a distance
smaller than approx. 8 in/20 cm, an alternating
continuous tone will sound between the front
and rear speakers.
The intermittent tones and the continuous tone
are turned off when selector lever position P is
engaged.
Depending on national-market version, the in-
termittent tones are switched off after a short
time when the vehicle is stationary.
If an object approaches when the vehicle is
stationary, the acoustic signal is reactivated.
Adjusting the volume
The volume of the acoustic warning can be
adjusted.
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Parking and maneuvering"
6. "PDC signal volume"
7. Set the desired value.
CONTROLS
207