BMW 2 COUPE 2023 Series Owner's Manual page 150

CONTROLS
Daytime driving lights
General information
The daytime driving lights light up when drive-
ready state is switched on.
Activating/deactivating daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti-
vate the daytime driving lights in front.
1. "MENU"
2. "Vehicle apps"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. Depending on vehicle equipment or na-
tional-market version:
▷ "Daytime driving lights"
▷ "Rear daytime driving lights"
Adaptive lighting functions
Principle
Adaptive lighting functions enable dynamic il-
lumination of the road.
General information
The adaptive lighting functions may consist of
one system or multiple systems, depending on
the equipment version:
▷ Cornering light.
Activating the adaptive lighting
functions
Press the button on the light switch el-
ement.
The LED in the button lights up.
150
Lights
Online Edition for Part no. 01405A5E788 - VI/22
The adaptive lighting functions are active
when the drive-ready state is switched on.
Cornering light
Principle
In tight curves, for instance on mountainous
roads or when turning, an additional cornering
light is switched on that lights up the inside of
the curve when the vehicle is moving below a
certain speed.
General information
The cornering light is automatically switched
on depending on the steering-wheel angle or,
where applicable, the use of turn signals.
When driving in reverse, the cornering lights
may be automatically switched on regardless
of the steering-wheel angle.
Adaptive headlight range
control
The adaptive headlight range control feature
balances out acceleration and braking proc-
esses as well as the vehicle load conditions in
order to avoid blinding oncoming traffic.
Automatic High Beam
Assistant
Principle
The Automatic High Beam Assistant detects
other road users early on and automatically
switches the high beams on or off depending
on the traffic situation.
General information
The Automatic High Beam Assistant ensures
that the high beams are switched on, when-