BMW 2 COUPE 2023 Series Owner's Manual page 139

Icon Description
Blue icon: cold drivetrain.
White icon: increased drive sys-
tem temperature, for instance
due to sustained or high
power demand when driving
on mountain roads.
Depending on vehicle equip-
ment and national-market ver-
sion:
Drive power limitation defined
via the BMW Digital Key.
System-related functional limi-
tation.
A Check Control message is
displayed in addition where ap-
plicable.
Tachometer
General information
Always avoid RPM in the red warning field. In
this range, the fuel supply is reduced to protect
the engine.
Activating/deactivating the
tachometer
The tachometer is displayed depending on the
selected drive mode or the individually config-
ured layout.
Reduced engine speed range
The available engine speed range may be re-
duced due certain factors such as a cold drive
system. The tachometer display is automati-
cally adjusted depending on the available en-
gine speed range.
In addition, icons in the tachometer indicate a
reduced speed range.
Online Edition for Part no. 01405A5E788 - VI/22
Displays
Standby state and drive-
ready state
The lettering OFF in the in-
strument cluster indicates that
drive-ready state is switched off
and standby state is switched
on.
The READY message in the in-
strument cluster indicates that
the Auto Start/Stop function is
ready to start the engine auto-
matically.
Additional information:
▷ Operating condition of the vehicle, refer to
page 40.
▷ Auto Start/Stop function, refer to page 111.
Engine temperature
Display
▷ Cold engine: the needle is in
the blue temperature range,
close to the stop of the tem-
perature display, and the text
WARM-UP is displayed.
Drive at moderate RPM and
vehicle speeds.
▷ Normal operating temperature: the needle
is in the middle or in the left half of the
temperature display.
▷ Hot engine: the needle is in the red temper-
ature range. In addition, a Check Control
message is displayed.
Additional information:
Coolant level, refer to page 294.
CONTROLS
139