BMW 2 COUPE 2023 Series Owner's Manual page 281

▷ After the tire inflation pressure has been
adjusted.
▷ After a tire or wheel change.
Performing initialization
When initializing, the set tire inflation pressures
serve as reference values in order to detect a
flat tire. Initialization is started by confirming
the tire inflation pressures.
Do not initialize the system when driving with
tire chains.
1. "MENU"
2. "Vehicle apps"
3. "Vehicle status"
4. "Flat Tire Monitor"
5. Turn on drive-ready state and do not drive
off.
6. Start the initialization with: "Perform reset"
7. Drive off.
The initialization is completed while driving,
which can be interrupted at any time.
The initialization automatically continues when
driving continues.
Messages
General information
When a flat tire is indicated, the Dynamic Sta-
bility Control (DSC) is turned on, if needed.
Safety information
Warning
A damaged regular tire with low or no tire
inflation pressure impacts handling, such as
steering and braking response. Runflat tires
can maintain limited stability. There is a risk
of accident. Do not continue driving if the
vehicle is equipped with normal tires. Follow
Online Edition for Part no. 01405A5E788 - VI/22
Wheels and tires
the information on runflat tires and continued
driving with these tires.
Indication of a flat tire
A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with a Check Control mes-
sage appears on the control display.
Icon Possible cause
There is a flat tire or a major tire
pressure loss.
Measure
1. Reduce your speed and stop cautiously.
Avoid sudden braking and steering maneu-
vers.
2. Check whether the vehicle is fitted with
standard tires or runflat tires.
Runflat tires are labeled with a circular icon
containing the letters RSC marked on the
tire sidewall.
Runflat tires, refer to page 267.
3. Read the description on what to do in case
of a flat tire.
Actions in the event of a flat tire
Standard tires
1. Identify the damaged tire.
To do this, check the tire pressure in all four
tires, for instance using the tire pressure
display from a tire repair set.
When the tire inflation pressure in all four
tires is correct, the flat tire monitor may not
have been initialized. In this case, initialize
the system.
If identification of flat tire damage is not
possible, please contact an authorized
MOBILITY
281