BMW 2 COUPE 2023 Series Owner's Manual page 175

achieved by the automatic braking function.
Automatic brake actuation is interrupted.
Canceling automatic braking
It may be necessary to interrupt automatic
braking in certain situations, for instance when
making an evasive maneuver.
Cancel automatic braking:
▷ By pressing the brake pedal.
▷ By pressing the accelerator pedal.
Fatigue alert
Principle
The Fatigue Alert can detect decreasing alert-
ness or fatigue of the driver during long, mo-
notonous trips, for instance on highways. The
system recommends a break.
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
one's physical state. An increasing lack of
alertness or fatigue may not be detected or
not be detected in time. There is a risk of
accident. Make sure that the driver is rested
and alert. Adjust driving style to traffic condi-
tions.
Function
The system is switched on each time drive-
ready state is switched on.
After starting the trip, the system is trained to
the driver, so that decreasing alertness or fati-
gue can be detected.
This procedure takes the following criteria into
account:
Online Edition for Part no. 01405A5E788 - VI/22
Safety
▷ Personal driving style, for instance steering
behavior.
▷ Driving conditions, for instance time, length
of trip.
▷ Attention of the driver through the Driver
Attention Camera.
Starting at approx. 43 mph/70 km/h, the sys-
tem is active and can also display a break rec-
ommendation.
Break recommendation
Setting break recommendation
The fatigue alert is active automatically each
time the drive-ready state is switched on and
can thus display a break recommendation.
The break recommendation can also be
switched on or off and adjusted via iDrive.
1. "MENU"
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Fatigue Alert"
7. Select the desired setting.
Display
If the driver becomes less alert or fatigued, a
message is displayed in the Control Display
with the recommendation to take a break.
During the display, various settings can be se-
lected.
After a break, another break recommendation
cannot be displayed until after approximately
45 minutes.
System limits
System functionality may be limited. If system
functionality is limited, either no warning is is-
sued or an incorrect warning is issued. The
CONTROLS
175