BMW 2 COUPE 2023 Series Owner's Manual page 87

In the interior
Overview
Power windows
Functional requirements
The windows can be operated under the fol-
lowing conditions.
▷ Standby state is switched on.
▷ Drive-ready state is switched on.
The vehicle key or a digital key must be inside
of the vehicle.
Opening windows
▷ Press the switch to the resistance
point.
The window opens while the switch
is being held.
▷ Press the switch beyond the resist-
ance point.
The window opens automatically.
Pressing the switch again stops the motion.
Closing the windows
▷ Pull the switch to the resistance
point.
The window closes while the switch
is being held.
▷ Pull the switch beyond the resist-
ance point.
Online Edition for Part no. 01405A5E788 - VI/22
Opening and closing
The window closes automatically. Pulling
again stops the motion.
Jam protection system
Principle
The jam protection prevents objects or body
parts becoming jammed between the door
frame and window while a window is being
closed.
General information
If resistance or blockage is detected while a
window is being closed, the closing will be in-
terrupted.
Safety information
Warning
Accessories on the windows such as anten-
nas can impact jam protection. There is a
risk of injury. Do not install accessories in the
area of movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if icing
might prevent normal closing, proceed as fol-
lows:
1. Pull the
point and hold it there.
The window closes with limited jam protec-
tion. If the closing force exceeds a specific
threshold, closing is interrupted.
2. Pull the
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection.
CONTROLS
switch past the resistance
switch past the resistance
87