BMW 2 COUPE 2023 Series Owner's Manual page 123

Activating Automatic Hold
1. Turn on drive-ready state.
2. Press the button.
The LED lights up.
The indicator light lights up green.
Automatic Hold is activated.
After every vehicle restart, the last se-
lected setting is active.
Automatic Hold holding the vehicle
Automatic Hold is activated and the driver's
door is closed.
After stopping, the vehicle is automat-
ically secured against rolling away as
soon as the indicator light illuminates
green.
Driving off
Press the accelerator pedal to drive off.
The brake is released automatically and the
indicator light of the parking brake is no longer
illuminated.
Automatic parking brake application
The parking brake is automatically set if drive-
ready state is switched off while the vehicle is
being held by Automatic Hold or if the vehicle
is exited.
The indicator light changes from green
to red.
The parking brake is not set automatically if
the drive-ready state was switched off while
the vehicle was coasting. Automatic Hold is
temporarily deactivated in this case.
Online Edition for Part no. 01405A5E788 - VI/22
Driving
Deactivate Automatic Hold
Press the button.
The LED goes out.
The indicator light goes out.
Automatic Hold is switched off.
If the vehicle is being held by Automatic Hold,
also press on the brake pedal when switching
off.
Turn signal
Turn signal in exterior mirror
When driving and during operation of the turn
signals or hazard warning system, do not fold
in the exterior mirrors so that the turn signal
lamps on the exterior mirror are easy to see.
Blinking
Press the lever past the resistance point.
Triple turn signal activation
Lightly tap the lever up or down.
The triple turn signal duration can be adjusted.
1. "MENU"
2. "Vehicle apps"
3. "Exterior lighting"
4. If necessary, "Additional settings"
CONTROLS
123