BMW 2 COUPE 2023 Series Owner's Manual page 190

CONTROLS
The maximum speed that can be set is limited
and depends, for example, on the vehicle and
the vehicle equipment.
The system can also be activated when sta-
tionary.
Turning Cruise Control on/off or
stopping it
Turning on the system
Press the button on the steering wheel.
The indicator lights in the instrument cluster
light up and the mark on the speedometer is
set to the current speed.
Cruise control is active. The current speed is
maintained and stored as set speed.
If necessary, the Dynamic Stability Control will
be turned on.
Turning off the system
To switch off the system while stationary, step
on brake pedal at the same time.
Press the button on the steering wheel.
The displays turn off. The stored set speed is
deleted.
Stopping the system manually
When enabled, press the button on the
steering wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Stopping the system automatically
The system is automatically interrupted in the
following situations:
▷ The driver applies the brakes.
▷ Selector lever position D is disengaged.
190
Driver assistance systems
Online Edition for Part no. 01405A5E788 - VI/22
▷ While Dynamic Traction Control is enabled
or Dynamic Stability Control is disabled.
▷ While Dynamic Stability Control is adjusting.
▷ When the vehicle is stationary, the seat
belt is unbuckled and the driver's door is
opened.
▷ The system has not detected objects for
an extended period, for instance on a
road with very little traffic without curb or
shoulder markings.
▷ The detection range of the radar is im-
paired, for instance by contamination or
heavy precipitation.
▷ After a longer stationary period when the
vehicle has been braked to a stop by the
system.
Adjusting the speed
Maintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted. The system will be
activated.
The current speed is maintained and stored as
desired speed.
The stored speed is displayed on the speed-
ometer.
If necessary, the Dynamic Stability Control will
be turned on.
The speed can also be stored by pressing a
button.