BMW 2 COUPE 2023 Series Owner's Manual page 204

CONTROLS
Turning the panoramic view on/off
Press the button.
Display
Yellow lines on the screen display identify the
bumpers of your own vehicle.
Depending on the engaged selector lever posi-
tion, the camera image of the rearview camera
or front camera will be displayed.
Activation points
Principle
Positions at which panorama view should
switch on automatically can be saved as acti-
vation points.
General information
Up to ten activation points can be stored.
Depending on national-market version, the ac-
tivation points can be used when driving for-
ward or in reverse.
Follow instructions in the Parking assistance
systems chapter.
204
Parking
Online Edition for Part no. 01405A5E788 - VI/22
Functional requirements
▷ A GPS signal must be received.
▷ A BMW ID or driver profile must be ena-
bled.
▷ The direction of travel, selector lever posi-
tion, and vehicle angle must correspond to
a stored activation point.
Storing activation points
1. Drive the vehicle to the position where the
system should switch on and stop.
2. Press the button.
3. "Activation point"
The current position is displayed.
4. "Save activation point"
Activation points are stored with one of the
following pieces of information if possible:
▷ With the city/town.
▷ With the city/town and the street.
▷ With the GPS coordinates.
Using activation points
The use of activation points can be switched
on and off.
1. Press the button.
2. "Settings"
3. "GPS-based"
Displaying activation points
1. Press the button.
2. "Manage points"
A list of all activation points is displayed.