Siemens SIMATIC RF200 System Manual page 98

Appendix
A.2 Overview of the service data
Index Object Subindex
name
0x40 Reader 0x00
parameter
0x43 IO-Link 0x00
baudrate
0x4A Event 0x00
history
0x01
0x02
0x03
0x04
0x05
98
Length Access Parameter
in bytes name
8 r/w -
1 r/w Event
indications
1 r/w Operation
mode
1 r/w Ready delay
1 r/w Data hold time
1 r/w Air Interface
1 r/w Modulation
1 r/w Subcarrier
1 r/w Data rate
1 r -
20 r -
4 r -
4 r -
4 r -
4 r -
4 r -
Description
Read out the reader parameters of the reader
(entire possible = subindex 0x00)
2: Event indication enabled (default)
4: No message
4: Scan UID (default)
8: Scan user data
2: Turn off
4: Turn on
additional safety mechanism for consistent data
transfer
Minimum time during which the process input data
is not changed by the device.
0x00: minimum (default)
•
0x0A: 100 ms
•
0x14: 200 ms
•
0x32: 500 ms
•
0x64: 1 s
•
0xC8: 2 s
•
0xFE: Test mode
•
"Trigger events"
Setting the
2: ISO default (default)
4: Special settings
Setting for the modulation strength
0 ... 100 % (default 22 %)
Subcarrier
2: single (default)
4: double
Date rate
2: low
4: high (default)
IO-Link baud rate
4: 38.4 kbps
Entire index selected
Last event
Second last event
Third last event
Fourth last event
Fifth last event
System Manual, 03/2012, C79000-G8976-C276-01
SIMATIC RF200 IO-Link