Siemens SIMATIC RF200 System Manual page 6

Introduction
Guide
This system manual describes hardware and programming of the IO-Link reader. They
comprise introductory chapters and reference chapters (e.g. technical data).
The system manual covers the following topics:
● Introduction to IO-Link
● Connecting the reader
● Assigning reader parameters
● Commissioning
● Diagnostics
● Technical specifications
● Ordering data
Additional documentation
The following documents contain information on the IO-Link masters ET 200S and ET
200eco and may contain further information that is relevant for you:
● Distributed I/O system ET 200S
● Distributed I/O device ET 200eco PN
Recycling and disposal
● Since RF200 IO-Link readers only contain low levels of harmful substances, they are
● For ecologically compatible recycling and disposal of your old device, contact a
6
(http://support.automation.siemens.com/WW/view/en/1144348)
(http://support.automation.siemens.com/WW/view/en/29999018)
suitable for recycling.
certificated disposal service for electronic scrap.
SIMATIC RF200 IO-Link
System Manual, 03/2012, C79000-G8976-C276-01