Dyson DC18 Service Manual page 41

Electrical wiring recap
Ensure the connection insulator is securely clipped
around the neutral terminals and fitted correctly
into the channel provided. The neutral wires must
be located securely into the retaining channels
provided before fitting the switches and remaining
wires.
Issued 10/06
Switch housing
Ensure that all wires are securely clipped to the
switches. All wires must be securely located into
the retaining clips provided.
Micro switch loom
Ensure the micro switch is located onto the two
locating pegs on the micro switch housing.
Ensure the wires are neatly dressed within the
micro switch housing and that there is no
possibility of either being trapped when fitting the
micro switch cover.
service manual
38