Dyson DC18 Service Manual page 31

121
Slide the PCB assembly into the ribs in the
brushbar motor cover.
122
Dress the PCB wire and cleaner head
connector block wire neatly/securely into the
retaining clips provided.
123
Refit the TCO reset switch. Attach the two
wires to the TCO reset switch. Dress all wires
neatly into the retaining clips provided.
Issued 10/06
124
Slide the front motor mount into the front of
the brush housing.
125
Attach the red wire to the motor terminal.
126
Position the front of the brushbar motor into
the front motor mount.
service manual
28