Table of Contents
Advertisement
2.11.1 Pair a Bluetooth Device
To connect the Mesa Pro and another device with Bluetooth
technology,
1.
Turn both devices on.
2. Place them within a few feet of each other. (The Mesa has
long range Bluetooth, but the other device might not.)
3. Make Bluetooth discoverable on both devices. Bluetooth on
the Mesa Pro is on by default. If you need to activate it, open
the Action Center by tapping on the Wi-Fi, volume, or battery
icon.
4. Tap and hold the Bluetooth icon. Select Go to Settings.
5. In the Bluetooth settings screen next to the "Pair new device"
option, tap Add Device.
6. Choose the kind of device you would like to add, then select
the device you would like to pair to from the list of available
options.
7.
If prompted, enter the PIN or pass code of the paired device.
You should now be paired with the device.
Note: If Bluetooth is on and the tablet enters Sleep or Hibernate
mode, Bluetooth turns off to save battery power. The connection
is resumed once it powers back on.
2.12 Wi-Fi Wireless Networking
The Mesa Pro has built-in Wi-Fi wireless networking to connect to
the internet or an office network.
2.12.1 Connect to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access point to
make a connection. When Wi-Fi is turned on (the default), the
Mesa Pro automatically starts scanning the area for available Wi-
Fi networks.
From the Action Center, click and hold the Wi-Fi network icon,
then select Go to settings. A list of available networks is shown.
Select the network you want to use and enter the network
security key. The Mesa Pro remembers the Wi-Fi network
connections created.
Wi-Fi can be turned off and on and settings can be managed
from this set up screen.
24
Mesa Pro Rugged Tablet User's Manual
Advertisement
Table of Contents
