Troubleshoot The Barcode Imager - Juniper Mesa Pro User Manual

2D Barcodes

3.3.3 Troubleshoot the Barcode Imager

If the barcode imager is not functioning correctly, you can set it to
factory default settings.
1. Launch Barcode Connector.
2. Scan the Set Factory Default barcode, shown here.
3. Use the Reset Settings button on the User page of the
Barcode Connector to restore the settings of the Barcode
Connector program.
4. Close the Barcode Connector program.
5. Launch Barcode Connector and verify that correct
functionality has been restored.
38
Mesa Pro Rugged Tablet User's Manual
Aztec
Maxicode
MicroPDF417
QR Code