Table of Contents
Advertisement
3.3 Barcode Imager
The Mesa Pro Rugged Tablet with a barcode imager allows you
to read 1D and 2D barcodes and easily import barcode data into
custom or standard programs running on the Mesa Pro. It is
accessed through the Barcode Connector Utility.
3.3.1 Barcode Connector™ Utility
The Barcode Connector utility is a barcode wedge program
provided with the barcode imager. If the utility is not available
you can download it from
article/13028.
Home Screen
When the Barcode Connector utility loads, the home screen
appears. From the home screen, you can do a Scan Test.
1.
Aim the imager towards a barcode.
2. Tap Scan on the screen or press the scan button on the
keypad (P2 is the default).
3. When a red aiming LED appears, place it on or near the
barcode.
After a successful scan, the Scan Symbology Type and Scan Data
are shown on the screen.
Barcode Menu
Select the menu symbol in the upper left corner of the home
screen or swipe the screen from left to right to see the menu (you
can do this from any screen in the application). This menu gives
you access to several setting screens.
https://junipersys.com/support/
3 Optional Features and Accessories
35
Advertisement
Table of Contents
