Table of Contents
Advertisement
4. An image on the battery compartment label shows the
correct location and orientation for the SIM card (slot
on the left). Pull the flexible card holder back out of the
way. Push the card into the slot to insert it.
SIM Card Slot
5. Push the flexible card holder back into place, covering
the card slots.
6. Replace the battery pack, and attach the battery door.
To remove the SIM card, gently pull it out with tweezers or a
piece of tape.
Note: If the modem was on before shutting the Mesa 3
down to insert the SIM card, you are prompted to configure
the data connection when you reboot.
Barcode Imager
The Mesa 3 Rugged Tablet with a barcode imager allows
you to read 1D and 2D barcodes and easily import barcode
data into custom or standard programs running on the
Mesa 3.
Barcode Connector Utility
The Barcode Connector
program provided with the barcode imager.
utility is a barcode wedge
™
Chapter 3 Optional Features and Accessories
Flexible
Card Holder
27
Advertisement
Table of Contents
