Kia PICANTO 2023 Manual page 521

Maintenance
Type B
OJA070129
Type C
OJA070130
1. Disconnect the negative (-) battery
terminal.
2. Remove the rear wheel guard after
loosening the mounting screws and
clips.
3. Disconnect the back up lamp connec-
tor.
4. Remove the socket from the assembly
by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.
5. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the socket into the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
8. Reinstall the lamp assembly to the
body of the vehicle.
Rear fog lamp (Bulb type) bulb
replacement (Type A)
Type A
OJA070146L
1. Disconnect the negative (-) battery
terminal.
2. Remove the rear wheel guard after
loosening the mounting screws and
clips.
3. Disconnect the rear fog lamp connec-
tor.
4. Remove the socket from the assembly
by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.
5. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
Light bulbs
8
8 99