Kia PICANTO 2023 Manual page 413

What to do in an emergency
it in a highly visible place inside the
vehicle such as on the steering wheel
to remind the driver not to drive too
fast.
Carefully follow below steps.
OJA060042
2. Shake the sealant bottle.
3. Connect the filling hose (3) onto the
connector of the sealant bottle (A).
4. Ensure that button (9) on the com-
pressor is not pressed.
ODEEV088013NR
5. Unscrew the valve cap from the valve
of the flat tyre and screw filling hose
(3) of the sealant bottle (2) onto the
valve.
6. Insert the sealant bottle into the hous-
ing of the compressor so that the bot-
tle is upright.
7. Ensure that the compressor is
switched off, position 0.
If you have a flat tyre (with tyre mobility kit)
OJA061031L
CAUTION
Securely install the sealant filling hose to
the valve. If not, sealant may flow back-
ward, possibly clogging the filling hose.
8. Connect between compressor and the
vehicle power outlet using the cable
and connectors (4).
OJA060014R
9. With the ENGINE START/STOP button
position on or ignition switch position
on, switch on the compressor and let
it run for approximately 5~7 minutes
to fill the sealant up to roper pressure.
The inflation pressure of the tyre after
filling is unimportant and will be
checked/corrected later.
Be careful not to overinflate the tyre
and stay away from the tyre when fill-
ing it.
7
7 23