Kia PICANTO 2023 Manual page 34

Safety features of your vehicle
4. Pull the lock release lever and fold the
rear seatback forward and down
firmly.
Type A
OJA030011L
Type B
OJA030074L
Type A
OJA030039R
3 12
Type B
OJA030075L
To unfold the rear seat:
1. To use the rear seat, lift and pull the
seatback backward. Pull the seatback
firmly until it clicks into place. Make
sure the seatback is locked in place.
When you return the seatback to its
upright position, always be sure it has
locked into position by pushing on the
top of the seatback.
If you can not see the red line atthe
side of folding lever, it meansthe seat-
back is locked completely.
2. Return the rear seat belt to the proper
position.
3. When the seatback is completely
installed, check the seatback folding
lever again.
WARNING
Uprighting seat
When you return the seatback to its
upright position, hold the seatback and
return it slowly. If the seatback is
returned without holding it, the back of
the seat could spring forward resulting
in injury caused by being struck by the
seatback.
Seats