Kia PICANTO 2023 Manual page 322

Driving your vehicle
Maintain a proper distance with the
vehicles in the right lane.
Blind-Spot Collision Warning mal-
function and limitations
Blind-Spot Collision Warning mal-
function
OJA050085R
When Blind-Spot Safety function is not
working properly, the 'Check Blind-spot
safety system' warning message will
appear on the cluster, and Blind-Spot
Collision Warning will turn off automati-
cally, or it will be limited. In this case,
have your vehicle inspected by a profes-
sional workshop. Kia recommends to
contact an authorised Kia dealer/service
partner.
OJA050086L
6 76
Blind-Spot Collision Warning (BCW)
When the outside rearview mirror warn-
ing light is not working properly, the
'Check side view mirror warning light'
warning message will appear on the
cluster. We recommend that you have
your vehicle inspected by an authorised
Kia dealer/service partner.
Blind-Spot Collision Warning dis-
abled
OJA050084R
When the rear bumper around the rear
corner radar or sensor is covered with
foreign material, such as snow or rain, or
installing a trailer or carrier, it can reduce
the detecting performance and tempo-
rarily limit or disable Blind-Spot Safety
function.
If this occurs, the 'Blind-spot safety sys-
tem disabled. Radar blocked' warning
message will appear on the cluster.
Blind-Spot Collision Warning will operate
normally when such foreign material or
trailer, etc. is removed, and then the
engine is restarted.
If Blind-Spot Collision Warning does not
operate normally after it is removed,
have the vehicle inspected by a profes-
sional workshop. Kia recommends to
visit an authorised Kia dealer/service
partner.