Kia PICANTO 2023 Manual page 404

What to do in an emergency
6. Loosen the wheel lug nuts counter-
clockwise one turn each, but do not
remove any nut until the tyre has
been raised off the ground.
OJA061006L
7. Place the jack at the front (1) or rear
(2) jacking position closest to the tyre
you are changing. Place the jack at
the designated locations under the
frame. The jacking positions are
plates welded to the frame with two
tabs and a raised dot to index with the
jack.
OJA061008L
7 14
If you have a flat tyre (with spare tyre)
OJA061007L
WARNING
Jack location
To reduce the possibility of injury, be
sure to use only the jack provided with
the vehicle and in the correct jack posi-
tion; never use any other part of the
vehicle for jack support.
8. Insert the jack handle into the jack
and turn it clockwise, raising the vehi-
cle until the tyre just clears the
ground. This measurement is approxi-
mately 30 mm (1.2 in). Before remov-
ing the wheel lug nuts, make sure the
vehicle is stable and that there is no
chance for movement or slippage.
Refer to "Tyres and wheels" on page
9-5 or the tyre pressure label on the
driver's door.
OJA061009L