Kia PICANTO 2023 Manual page 51

Safety features of your vehicle
to use seat belts to secure the Child
Restraint System to the rear seats.
ISOFIX anchorages are metal bars built
into the vehicle. There are two lower
anchors for each ISOFIX seating position
that will accommodate a Child Restraint
System with lower attachments.
To use the ISOFIX system in your vehi-
cle, you must have a Child Restraint Sys-
tem with ISOFIX attachments.
The Child Restraint System manufac-
turer will provide you with instructions
on how to use the Child Restraint Sys-
tem with its attachments for the ISOFIX
anchorages.
ISOFIX anchorages have been provided
in the left and right outboard rear seat-
ing positions. Their locations are shown
in the illustration.
OJA030064R
WARNING
Do not attempt to install a Child
Restraint System using ISOFIX anchor-
ages in the rear centre seating position.
There are no ISOFIX anchorages pro-
vided for this seat. Using the outboard
seat anchorages, for the CRS installation
on the rear centre seating position, can
damage the anchorages.
Child restraint system (CRS)
Type A
OJA030015L
Type B
OJA030016L
ISOFIX anchorages are located between
the seatback and the seat cushion of the
rear seat left and right outboard seating
positions, indicated by the symbols.
* 1 : ISOFIX Anchor Position Indicator
(Type A-
ISOFIX Anchor
Securing a Child Restraint System
with the "ISOFIX Anchorage Sys-
tem"
To install an i-Size or ISOFIX-compatible
Child Restraint System in either of the
rear outboard seating positions:
1. Move the seat belt buckle away from
the ISOFIX anchorages.
,Type B- ) 2 :
3 29
3