Cleaning and caring for the unit
Requirements Cleaning cartridges sealed and undamaged
6.10.4 Starting automatic cleaning
Prerequisite Water connection is opened
6.10.5 Canceling automatic cleaning
INFORMATION
6.10.6 Ending automatic cleaning
CAUTION
Requirements Automatic rinsing has stopped after the cleaning program was
54
1. Open the cooking zone door.
2. Open the lid of the cartridge.
3. Insert the cartridge into the holder on the air diverter or into the
holder on the tray trolley.
4. Close the cooking zone door.
The center display shows the selected cleaning level.
"CAr" appears on the right display.
The unit is on
Cooking chamber temperature at 60 °C (140 °F)
Press the "START STOP" button.
The button's indicator light flashes.
The center display shows the selected cleaning level.
The right display shows the remaining time.
Press the "START STOP" button.
The cleaning program is cancelled.
"End" appears on the left display.
The center display shows the selected cleaning level.
"CAr" flashes on the right display.
Automatic cleaning is canceled.
On cancellation, automatic rinsing of the cooking chamber is initiated.
Risk of chemical burns
Dripping liquid can contain chemically aggressive components; it is thus nec-
essary to take appropriate protective measures.
cancelled or the cleaning time has elapsed
1. Open the cooking zone door.
2. Remove the empty cleaning cartridge.
3. Use the hand-held shower to thoroughly rinse out any remaining
cleaner or rinsing agent.
Operating instructions