Intermec PB50 User Manual page 20

Chapter 1 — Using the PB50 Mobile Label Printer
12
6 Press down on the self-strip door to make sure the media
cover is completely latched.
7 Press the Feed button to advance the media.
To load media for self-strip printing
1 Complete Steps 1 through 4 in the previous procedure.
2 Open the self-strip door in the media cover.
Self-strip
door
3 Remove a label from the roll of media so that you are left with
several inches of label liner.
Self-strip
bar
PB50 Mobile Label Printer User's Guide