Understanding The Backlight; Using The Batteries - Intermec PB50 User Manual

Chapter 1 — Using the PB50 Mobile Label Printer

Understanding the Backlight

Using the Batteries

6
The screen backlight on the PB50 behaves the same way as a
screensaver on your PC. After a set amount of time elapses
without any user interaction, the backlight goes off. The screen
backlight turns on when:
• the printer begins printing.
• you press a button.
• you connect the printer to external power.
• you are communicating with or sending data to the printer.
You can change the amount of time to have elapse before the
backlight turns off using the Setup menu. Options for backlight
are always off, always on, 5 seconds, 10 seconds, 20 seconds, 30
seconds, or 60 seconds.
The PB50 uses a rechargeable 2200 mAh lithium-ion battery
(Model AB13) for power. You must fully charge the battery
before you can use the PB50. A fully charged battery can last up
to one week without needing to be recharged when the printer is
in Standby mode.
Use Intermec Model AB13 battery only. Use of another
battery may present a risk of fire or explosion.
The Model AB13 battery may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat above 100°C
(212°F), or incinerate.
Dispose of used batteries promptly. Keep away from children.
PB50 Mobile Label Printer User's Guide