Understanding The Printer Sounds - Intermec PB50 User Manual

Understanding the Printer Sounds

PB50 Mobile Label Printer User's Guide
Chapter 1 — Using the PB50 Mobile Label Printer
There is only one LED on the PB50 printer: the Ready-to-
Work™ indicator.
Understanding the Ready-to-Work Indicator
Indicator State Description
Off The PB50 is in Standby mode.
On The PB50 is powered on and operating.
Blinking A blinking light can mean one of several
conditions:
• The printer is out of paper.
• The media cover is open.
• There is a printer error that requires you to
The PB50 plays sounds in response to several actions that you
can take with the printer. Use the following table to understand
when the sounds occur and what they mean.
Understanding the Printer Sounds
Sound Occurs When:
Power • You insert a battery in the printer.
• The PB50 starts charging the battery.
• You plug in the AC adaptor.
Hardware You open the media door, close the media door, or
insert a cable.
Button You press any of the PB50 buttons.
Error • The printer cannot feed paper or print a job
• An error occurs such as a paper jam, a print
perform an action. For a list of possible
problems, see "Troubleshooting the PB50" on
page 38.
because of a hardware issue such as the media
door open, a paper jam, or there is no media.
error, or the printer is out of range.
5