Configuring The Pb50; Understanding The Display Modes; Understanding Ready Mode; Understanding Information Mode - Intermec PB50 User Manual

Chapter 2 — Configuring the PB50

Configuring the PB50

Understanding the Display Modes

16
You can change the configuration settings of the PB50 printer
directly from the display, by sending commands from your PC,
by using the web pages, or remotely from the SmartSystems
console.
For more information on the IPL and Fingerprint menu systems,
see"IPL and Fingerprint Setup Menus" on page
The PB50 has six display modes to help you effectively interact
with the printer: Ready, Information, Paused, Setup, Error, and
Test. Use the following sections to understand the different
printer modes

Understanding Ready Mode

The printer is in Ready mode when the printer is on and ready to
print. The main screen displays the power status, the radio status,
and the printer language and version.
SETUP:
IPL 11.1.0
SER-COM
The PB50 in Ready Mode

Understanding Information Mode

When the printer is in Information mode, it displays a subset of
pertinent information about the printer. If the printer
experienced an error, the error message displays first followed by
the printer information. Each message displays on the screen for
five seconds. After five seconds on the last information screen, the
printer exits Information mode.
SETUP:
I/O serial 5
SER-COM
8N1 9600
The PB50 in Information Mode
X
PB50 Mobile Label Printer User's Guide
53.