Understanding The Control Panel - Intermec PB50 User Manual

Understanding the Control Panel

PB50 Mobile Label Printer User's Guide
Chapter 1 — Using the PB50 Mobile Label Printer
The current firmware type and version display on the PB50
screen when the printer is in Ready mode.
SETUP:
IPL 11.1.0
SER-COM
The screen of a PB50 running IPL firmware
The PB50 control panel contains four buttons, a liquid crystal
display (LCD), and one LED indicator. Use the four buttons to
navigate the menu system and perform functions on the PB50
printer. See the following tables to understand the buttons, the
menu system, and what the LED means.
Feed button
Standby button
PB50 Control Panel: Use this illustration to familiarize yourself with the
buttons and lights on the PB50.
Understanding How to Use the PB50 Buttons
Button
Name Button
Feed
Setup button
SETUP:
SER-COM
Info button
Ready-to-Work
indicator
Function
Press to advance label or receipt paper. The
amount of media that feeds is dependent on the
type of media you are using. It will advance by 5
mm (0.2 inch), feed out an entire label, or feed a
configured length of media based on your media
and settings.
If the printer is printing, pressing this button
causes the printer to pause. Press the button
again to resume printing.
3