Identifying Easylan Wireless Model Aw02 Components - Intermec EasyLan AW02 User Manual

Chapter 1 — Installing EasyLAN Wireless

Identifying EasyLAN Wireless Model AW02 Components

6
Make sure you can identify the EasyLAN Wireless Model AW02
components on the back of your printer.
Antenna
Console-only
serial port
EasyLAN Wireless Components: This illustration shows what EasyLAN Wireless Model
AW02 looks like when it is installed in a 3400e printer. To see the difference between an
EasyLAN Wireless Model AW01 and AW02, see "Identifying EasyLAN Wireless Models
AW01 and AW02" on page 82.
Identifying EasyLAN Wireless Components
Component Description
Antenna connector Attach the antenna to this connector.
Console-only Use this "console-only" serial port only to configure EasyLAN
serial port Wireless with the EasyLAN Network Setup configuration
(DB9) wizard or with the console commands. For a list of required
serial communications values, see the table on page 12.
Test switch Use this switch to print a test label or reset EasyLAN Wireless.
For help, see "Printing Test Labels" on page 14.
LEDs Three LEDs indicate status and diagnostic information, as
described in the next table.
Antenna
connector
Test
switch
LEDs
EasyLAN Wireless User's Manual