Appendix A — Specifications
Finishers
80
EasyLAN 10i2 Adapter
The external EasyLAN 10i2 Ethernet adapter (P/N 072885) and the
internal EasyLAN 10i2 Ethernet adapter (P/N 072884) allow you to share
your available printer resources with everyone on your Ethernet network.
With the EasyLAN 10i2 adapter installed, the parallel port on the printer
is not available for use. For more information, see the EasyLAN 10i2
documentation.
EasyLAN Wireless Option
The EasyLAN Wireless is an 802.11b radio option that lets the printer
communicate wirelessly with a PC that contains an 802.11b radio card
(ad-hoc network). It can also communicate with other devices via an access
point (infrastructure network) in your data collection network. For more
information, see the EasyLAN Wireless documentation.
Coax Interface
This option lets you connect the printer to an IBM 3270 Type A coax
cable computer system operating in the VTAM (CICS/IMS/TSO) or
8100 (DPPX) environment. The printer will emulate an IBM 3287
printer and you can connect it to an IBM 3174/76/99 system
controller/multiplexer.
Twinax Interface
This option lets you connect the printer to an IBM twinax cable system
with a twinax interface. The printer will emulate an IBM 5256 Model 1
printer and can operate with an IBM System/34, System/36, System/38,
or AS/400 host computer.
Cutter
The cutter option lets you cut continuous media into individual labels
ready for use. You can also order two different trays that will catch the
labels as they are cut.
Self-Strip/Full Roll Batch Takeup
The self-strip option allows labels to be peeled from the liner as they print
and presented for immediate application to a surface (such as a shipping
box). The batch takeup enables you to run the printer in batch mode and
is capable of taking up a full roll of media. This option is factory-installed
only.
EasyCoder 4420 and 4440 Bar Code Label Printer User's Manual