Table of Contents
Advertisement
Appendix A — Console Commands
Sending the Console Commands
Using the Web Browser to Send Console Commands
86
You can use the three methods to send console commands to EasyLAN
Wireless:
• Web browser interface
• FTP
• HyperTerminal
The following procedure explains how to use the web browser interface to
send console commands to the EasyLAN Wireless.
To use the web browser interface to send a console command
1 Log in to the EasyLAN Wireless web page. For help, see "Logging In to
the EasyLAN Wireless Web Browser Interface" on page 25.
2 Click Admin. The Web Admin Configuration page appears.
3 Click Console. The Console page appears with the
over the input field. In some cases, the
• If the
prompt appears, the EasyLAN Wireless is in protected
Local:
mode. You need to use the
to get to the
Local>
• If the
prompt appears, the EasyLAN Wireless is in boot mode.
Boot>
To exit boot mode, you need to press and hold the test switch while
cycling printer power, and then begin this procedure again.
Local>
command, described on page 93,
unpro
prompt.
EasyLAN Wireless User's Manual
prompt
Local>
prompt does not appear:
Advertisement
Table of Contents
Troubleshooting
