Using Ftp To Send Console Commands - Intermec EasyLan AW02 User Manual

Appendix A — Console Commands

Using FTP to Send Console Commands

88
You can create a text file (.txt) that contains multiple console commands,
and then you can FTP the text file to EasyLAN Wireless.
To use FTP to send a text file
1 On your PC, use Windows Notepad or another text editor to create a
text file that contains the console commands.
2 Save the text file (.txt).
3 From a system prompt, type:
FTP ipaddress
where ipaddress is the IP address or name assigned to EasyLAN Wireless.
4 When prompted for a username, press Enter. A username is not
required.
5 When prompted for a password, type the console password and press
Enter. The default password is
For information about setting the console password, see
on page 91.
password
6 From the FTP prompt, type:
put pathname\filename.txt console
where:
pathname is the location of the text file.
filename.txt is the name of the text file.
7 Type and press Enter to exit.
bye
Example
Save this information in the c:\temp directory as ip.txt.
set ip subnet 255.255.255.0
set ip router 192.168.0.1
set ip method static
set netware disable
save
exit
From the FTP prompt, type:
put c:\temp\ip.txt console
The EasyLAN Wireless you are logged into is updated with the new
TCP/IP information.
.
intermec
EasyLAN Wireless User's Manual
set pa