Maintenance; Printhead Cleaning - Intermec EasyCoder F2 User Manual

Maintenance

Printhead Cleaning

1
Open the side door.
Intermec EasyCoder F2 – User's Guide
Cleaning the printhead on a regular basis is important for the
life of the printhead and for the printout quality. You should
clean the printhead each time you replace the media. This section
describes how to clean the printhead using cleaning cards. If
additional cleaning is required, for example removing adhesive
residue from the platen roller or tear bar, use a cotton swab
moistened with isopropyl alcohol.
Isopropyl alcohol [(CH
mable, moderately toxic, and mildly irritating substance.
2
Turn the printhead lift lever clockwise to raise
Warning!
) CHOH; CAS 67-63-0] is a highly fl am-
3 2
the printhead.
Chapter 11
75